全自動鎢鋼圓棒切斷機

發布時間：2019-4-22 8:17:32

  1.切割方式多樣化：能實現一端平頭、兩端平頭、等切和分切幾種不同的切割方式，只需在界面上直接切換。 Diversified cutting methods: it can achieve several different cutting methods, such as flat head at one end, flat head at both ends, equal cutting and cutting. It only needs to switch directly on the interface.
2.切割偵測功能：切割片能自動實時檢測損耗，自動損耗補償。Cutting detection function: cutting piece can automatically detect loss in real time, automatic loss compensation

3.精準的推料機構：切段長度精度為±0.05mm，批量尺寸一致。Precise pushing mechanism: the cutting length accuracy is 0.05mm and the batch size is consistent

4.端面無缺口、掉角：壓料為切口前后兩段同時壓料 No notch or dropping Angle on the end face: The pressing material is the pressing material at the same time before and after the cutting
5.獨特的壓料機構：每根料有獨立壓頭，壓料穩固。Unique press material mechanism: each material has independent press head, press solid.
6.切料端面垂直：切斷后端面垂直平整、光潔度高，無需二次磨削。The end face of cutting material is vertical: after cutting, the end face is vertical and smooth with high finish, without the need of secondary grinding.